Instructions for changing transmission fluid:
1. Remove cover from rear of engine using a 9/16" wrench.
2. After removing cover remove the two fill screws on the
transmission.
3. Cut the bottom off of a plastic water bottle so that it fits
between transmission and brake bracket.
4. Turn the transmission housing so that the holes are at
12 o'clock and 6 o'clock position and let all oil drain out of the
transmission. On the first oil change you may have to use you
oil can to purge the system, (we use grease to assemble the unit
and this will come out at the first oil change).
4. After all oil is drained, turn the
holes to the 11 o'clock and 5 o'clock
position. Using a large syringe or a
small hand held oil pump, pump
(10W30 engine ) oil into the
11 o'clock hole. When oil starts to
come out of the 5 o'clock hole the
transmission is full. Turn the holes
to the side and put the drain screws
back in place. Reinstall the
transmission cover.
6
Need help?
Do you have a question about the GTR and is the answer not in the manual?
Questions and answers