2.2.10 Wall Mounting (AC Adaptor)
2.2.10 Wall Mounting (AC Adaptor)
Mounting on Wooden Wall
WARNING
•
Only use the wall-mounting equipment (screws, washers) included with the PBX.
•
Be careful not to drop any components. Dropping components may damage them or cause an
injury.
1.
Place the reference for wall mounting (on the following page) on the wall to mark the two screw positions.
2.
Install the screws and washers (included) in the wall.
Washer
Drive the screw
to this position.
Note
•
Make sure that the screw heads are at the same distance from the wall.
•
Install the screws perpendicular to the wall.
3.
Hook the AC adaptor on the screw heads.
58
Installation Manual
110 mm
(4-5/16 in)
Document Version 2010-11