Using a Handset, Headset, and Speakerphone
You can use your phone with these audio devices: a handset, headset, or speakerphone.
The phone is off-hook when the handset is lifted or another audio device is in use.
The phone is on-hook when the handset is in its cradle and other audio devices are not in use.
Using a Handset
If you want to...
Use the handset
Switch to the speakerphone or
headset during a call
Adjust the volume level for a
call
Using a Headset
Your phone supports four- or six-wire headset jacks for wired headsets, and also supports wireless
headsets. For information about purchasing headsets, see
You can use a headset with all of the controls on your phone, including
However, if you use a wireless headset,
If you want to...
Toggle headset mode on and off Press
Switch to a handset
Adjust the volume level for a
call
If you use AutoAnswer, see
Cisco Unified IP Phone 7965G and 7945G Phone Guide for Cisco Unified Communications Manager 7.1(2)
Then...
Lift it to go off-hook; replace it to go on-hook.
The ringing line is automatically selected. Ask your system
administrator about options to always select the primary line.
Press
or
Press
Press Save to preserve the volume level for future calls.
refer to the wireless headset documentation for information .
Then...
.
Lift the handset.
Press
Press Save to preserve the volume level for future calls.
Using AutoAnswer with a Headset or Speakerphone, page
, then hang up the handset.
during a call or after invoking a dial tone.
Headset Support, page
during a call or after invoking a dial tone.
6.
and
.
55.
53