Connecting To Your Pc - Olympus DR-1200 Instructions Manual

Connecting to your PC

The Directrec can be used as a USB speaker or microphone when connected
to a PC. If you use the Directrec as a USB speaker, you can output voice through the
Directrec instead of using the PC speaker.
When used as a microphone, you can record voice on your PC using your favorite
application.
Connecting to your PC using the USB
cable
1 Connect the Directrec USB cable
directly into the USB port or USB
hub of your PC.
EN

Disconnecting from your PC
1 Disconnect the Directrec USB
cable from your PC USB port or
USB hub.
Windows
• Go to the Windows [start] menu,
→[Control Panel]→[Sounds and
Multimedia] and then select [Audio].
Open the [Audio] window and select
USB Audio Device as the setting
for "Sound Playback" and "Sound
Recording".
Macintosh
• Go to the Macintosh [Apple menu],
→[System Preferences] and then
select [Sound]. Open the [
window and select USB Audio Device and select USB Audio Device
as the setting for "Output" and
"Input". Input". ".
Notes
• Some PCs and USB hubs may not supply
sufficient power and the Directrec fails to
connect. Refer to your PC User's Manual
regarding the USB port or USB hub on
your PC.
• When using a USB hub to connect the
Directrec, always use a self-powered (AC
adapter) USB hub.
• Never disconnect the USB code while the
record/play indicator light is flashing. If
you do, the data will be destroyed.
Audio]. ].
window and select and select
Open the [Sound] Open the [
Output" and " and