GE 700 VA Installation Manual page 10

•
2 Insert the flat cable on J2 connector of the VH Prog. Board.
•
3 Connect USB and the flat cable to the E8a Programmer.
•
4 Top view of the final cabling for the firmware update with the VH Programming Board for
Digital Energy™ VH Series.
NOTE: Pins 13 and 14 are 5V plug-in, and pins 15 and 16 are GND plug-in.
Modifications reserved
Fig. 2
Fig. 3
Fig. 4
10 ISG_VHS_FRM_UPD_XGB_V010.doc