Reset Saved-Configuration - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Configuration File Management
H3C S3100 Series Ethernet Switches
View
Any view
Parameters
by-linenum: Displays configuration information with line numbers.
Description
Use the display this command to display the current configuration performed in the
current view. To verify the configuration performed in a view, you can use this command
to display the parameters that are valid in the current view.
Note that:
Effective parameters that are the same as the default are not displayed.
The configured parameter whose corresponding function does not take effect is
not displayed.
Execution of this command in any user interface view or VLAN view displays the
valid configuration parameters in all user interfaces or VLANs.
Related commands: save, reset saved-configuration, display saved-configuration,
display current-configuration.
Examples
# Display the configuration parameters that take effect in all user interface views.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] display this
#
user-interface aux 0
user-interface vty 0 4
authentication-mode none
user privilege level 3
#
return

1.1.6 reset saved-configuration

Syntax
reset saved-configuration [ backup | main ]
View
User view
1-11
Chapter 1 Configuration File
Management Commands