Jacking The Car - Fiat Panda 100HP User Manual

JACKING THE CAR

WITH THE JACK
fig. 9
If the car needs to be jacked up on one side, place the slot of the jack in correspon-
dence with the arrow (O) on the side member: the finish under the floor is interrupted
A-fig. 9 to enable fitting the jack on the groove fig. 9.
8
WITH ARM HOIST
fig. 10
If the car needs to be jacked up, go to a
Fiat Dealership which is equipped with
shop jacks and jack arms.
F0G0647m
Jack up the car only by positioning the jack
arms or the shop jack in the points shown
in fig. 10.
When jacking the car using
shop jack or jack arms, make
sure the arms are not inter-
fering with the car side skirts.
F0G0711m