Networking Features - Panasonic KX-TDE100 Installation Manual

Internet Protocol (IP) Related Features
Server Connection
This PBX supports the connection to the following servers, allowing for enhanced efficiency and record
keeping:
–
SNMP Server:
Allows for users assigned as SNMP managers to manage and receive PBX system status information,
such as local alarm information and general system activity using Simple Network Management
Protocol (SNMP).
–
SNTP Server:
Allows for the PBX to automatically receive and update the time setting using Simple Network Time
Protocol (SNTP).
–
DHCP Server:
Allows for this PBX to receive IP addresses from a Dynamic Host Configuration Protocol (DHCP)
server.
Peer-to-peer Connection
Intercom calls can be made between peer-to-peer compatible IP extensions allowing for communication
without using the PBX's VoIP resources.

Networking Features

This PBX supports the following networking features:
Voice over Internet Protocol (VoIP) Network
The PBX can connect to another PBX via a private IP network. In this case, voice signals are converted
into IP packets and sent through this network. Automatic rerouting of VoIP calls to public trunks is also
available, in case of network difficulties.
TIE Line Service
A TIE line is a privately leased communication line between two or more PBXs, which provides cost
effective communications between company members at different locations.
Virtual Private Network (VPN)
VPN is a service provided by the VPN service provider. It uses an existing public line as if it were a private
line.
QSIG Network
QSIG is a protocol based on ISDN (Q.931) and offers enhanced PBX features in a private network of two
or more connected PBXs.
External Device Support
The following are just a few of the many useful optional devices available to enhance your telephony system:
Portable Station (PS) Features
PSs can be connected to this PBX. It is possible to use the PBX features using the PS like a PT. This PBX
supports basic CSs (allows up to 4 PSs to be on a call simultaneously) as well as high-density CSs (allows
up to 8 PSs to be on a call simultaneously). A PS can also be used in parallel with a wired telephone
(Wireless XDP Parallel Mode). In this case, the wired telephone is the main telephone and the PS is the
sub telephone.
Cellular Phone Features (KX-NCS4910 required)
This PBX supports the use of cellular phones destinations with the PBX. In combination with the use of
certain features such as Virtual PS, DISA, and XDP Parallel mode, cellular phones can make and receive
calls as if they were registered extensions.
Phone Assistant (PA) Pro Series
This PBX supports Phone Assistant Pro Series applications, a collection of highly-intuitive CTI applications
that allow you to use your PC to access a variety of PBX features conveniently and efficiently. PA Pro
1.1.1 System Highlights
Installation Manual 21