Silent Mode; Panic Mode; Valet Mode - Clifford Concept 650 Owner's Manual

G426V_2008_08a.qxd 8/13/2008
➜

silent mode

To temporarily turn off the arm or disarm chirps, use Silent
Mode™. Simply press
arming or disarming, and the confirmation chirp(s) will be elim-
inated for that one operation only. If you want the arm/disarm
chirps turned off permanently, your dealer can do this for you.
note: The Warn Away® response to lighter impacts is
bypassed if the system is armed using Silent Mode. This
ensures that no chirps will be emitted by the siren in an
area you want chirp-free. The system is still fully capable
of triggering, only the Warn Away® response is bypassed.
➜

panic mode

If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter. Just
press for two seconds, and you will enter Panic Mode. The
siren will sound and the parking lights will flash for the
programmed siren duration. To stop Panic Mode at any time,
press on the remote transmitter again.
➜

valet mode

You can prevent your security system from automatically arming
and triggering by using Valet Mode. This is very useful when
washing the vehicle or having it serviced. In Valet Mode, the
security system will not arm, even with the remote transmitter,
but all convenience functions (door locks, trunk release, etc.)
will continue to work normally.
© 2008 Directed Electronics - All rights reser ved.
10:22 AM Page 13
for less than one second before
13
24-Mar-10