Copyright of the entire product, including its accessories and software, belongs to Medialink Products, LLC. No individual or party is permitted to copy, plagiarize or imitate this product without the expressed written consent of Medialink Products, LLC.
Page 3
Wireless N USB Adapter - User Guide FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Support for PSP, NDS and WII connections with Xlink Kai allows for a rich on-line gaming experience. The Medialink MWN-USB150N is a high performance Wireless N USB Adapter with improved range, faster throughput and state of the art security. P a g e...
Wireless N USB Adapter - User Guide Product Features • EZ Install – Simplified Installation via Graphical User Interface. • Microsoft WHQL Certification ensures compatibility with Windows OS. • Supports Windows 2000, XP, Vista 32-Bit, Vista 64-bit, Linux & MAC. •...
Wireless N USB Adapter - User Guide Installation Guide *IMPORTANT NOTE* - DO NOT INSERT YOUR MEDIALINK WIRELESS USB ADAPTER INTO YOUR COMPUTER USB PORT UNTIL AFTER THE SOFTWARE IS INSTALLED. Please follow the simple steps in this Guide to get your computer quickly connected to your wireless network.
Wireless N USB Adapter - User Guide Install Software STEP 1. Insert CD into an available CD-ROM drive. NOTE: The following Screen shots illustrating the installation procedure are from a Windows XP installation. Other operating systems may show slightly different dialogue boxes but the installation procedures will be the same.
Page 9
Wireless N USB Adapter - User Guide STEP 3. Click Next to start installation. STEP 4. Click Next to continue. (Installation may take a few minutes. Please wait.) P a g e...
Page 10
Wireless N USB Adapter - User Guide STEP 5. Click Finish to complete the software installation. STEP 6. Insert the USB Adapter into an available USB slot. Please wait while hardware drivers are installed. (For Windows 2000 & Windows Vista you will be prompted to restart your computer) P a g e...
Page 11
Note - If your router has security enabled, please insert your router password and wait for your router authentication. The tray icon will turn green to indicate communication with the router. CONGRATULATIONS! You’re Medialink adapter is now successfully connected to your wireless network. 10 | P a g e...
“MWN-USB150N”; or click the Medialink shortcut on your PC’s desktop. Note: With Windows XP, users can select either the Medialink Client Utility Interface or the Windows XP internal wireless application to configure and manage the Medialink MWN-USB150N wireless adapter.
Wireless N USB Adapter - User Guide Station Mode - “Status” Tab When the “STATUS” tab is selected, the wireless network status, SSID, Authentication type, Encryption Type, IP address, subnet mask and gateway are displayed. 12 | P a g e...
Wireless N USB Adapter - User Guide Station Mode - “Site Survey” Tab The “SITE SURVEY” tab is used to scan and display the available wireless networks. The signal strength of the available networks along with the encryption type will also be displayed. Click Connect: to select and connect to the desired network.
Wireless N USB Adapter - User Guide Station Mode - “Profile Management” Tab The “PROFILE” tab allows you to save multiple profiles for quick connection to various networks. Click UP/DOWN: To change a profile’s sequence in the list. Click Connect: To activate an existing profile. Click New: To create a new profile and configure the site status and security setting.
Wireless N USB Adapter - User Guide Station Mode - “Statistics” Tab The “STATISTICS” tab is used to display Rx and Tx data packets, including the success and error packet amount. Click Clear: to refresh the statistics. 15 | P a g e...
Wireless N USB Adapter - User Guide Station Mode - “WPS Setting” Tab The WPS is available only when used with WPS-compliant routers. PIN: Enter the Pin code and click “PIN” to automatically connect the wireless adapter to available networks. PBC:...
Wireless N USB Adapter - User Guide AP Mode – General Info In cases where wireless access to an Ethernet network is desired, the Medialink MWN-USB150N can serve as an access point to transmit wireless signals and to allow other wireless clients to access the network.
Wireless N USB Adapter - User Guide AP Mode - Basic Setting This window is used to configure the AP’s basic parameters, including SSID, Wireless Mode and Channel. SSID: Here you can give your AP a Wireless Network ID name (SSID). Wireless Mode: Here you can set the AP to operate at 802.11b, 802.11g, or 802.11b/g/n mixed.
Wireless N USB Adapter - User Guide AP Mode - Security Setting This window is used to configure the wireless network’s security authentication, providing WEP, WPA-PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK encryption methods. WEP:10/26 bits Hex or 5/13 ASCII support. WPA-PSK:8~32 bits ASCII support. WPA2-PSK:8~32 bits ASCII support.
Wireless N USB Adapter - User Guide AP Mode - Access Control Access Control uses client MAC addresses to allow or disallow access to the network. Filter Policy: Disabled: Disables the filter function. All Permitted: Permits all clients in the list to access the wireless network. All Blocked: Blocks all clients in the list from access to the wireless network.
Wireless N USB Adapter - User Guide Appendix One: Acronyms and Terms WLAN Wireless Local Area Network 802.11 A family of specifications developed by the IEEE for WLAN technology. 802.11a An extension to 802.11 WLAN standard that provides up to 54 Mbps transmis- sion in the 5 GHz UNI radio band.
Wireless N USB Adapter - User Guide Appendix Three: How to connect with PSP Topology of PSP connecting with MWN-USB56N 2. To configure PSP with Ad-Hoc mode Select Network Settings Select Ad-Hoc mode Select Channel 24 | P a g e...
Page 26
Wireless N USB Adapter - User Guide 3. In MWN-USB56N Utility Interface scan PSP and double-click to connect the wireless network. 4. In Site Survey check “enable PSP connection mode” box. 25 | P a g e...
Page 27
Wireless N USB Adapter - User Guide 5. To configure Xlink Kai Select “Start”→ “All programmers” → “Xlink Kai Evolution VII” → “Start Kai Config” to configure the user name, password and other parameters as follows. 6. Login Xlink Kai Select “Start”→...
Page 28
Wireless N USB Adapter - User Guide Thank you for purchasing this Medialink product! Please contact us if you need any assistance with installation. We’ll be happy to help! Medialink Products, LLC 1951 Old Cuthbert Rd., Ste 301 Cherry Hill, NJ 08034-1411...
Need help?
Do you have a question about the MWN-USB150N and is the answer not in the manual?
Questions and answers