Bluetooth Connection - Philips Saeco GranBaristo Service Manual

GRAN BARISTO
CHANGE FILTER
The machine needs the
"INTENZA+" water fi lter to be
replaced.
The machine is priming the
WATER CIRCUIT
PRIMING
water circuit. Wait for this
operation to be over.
Take note of the code (E xx) shown on the display at the bottom.
Turn off the machine. Turn it back on after 30 seconds. Repeat the procedure 2 or
RESTART TO SOLVE
3 times.
If the machine does not start, contact the Philips SAECO hotline in your country
and quote the code shown on the display. Contact details can be found in the war-
ranty booklet packed separately or at www.philips.com/support.

BLUETOOTH CONNECTION

Download the application on your mobile device to access the machine functions.
To connect GranBaristo Avanti with your mobile device, download the Saeco
Avanti App available on the App Store and Google Play or scan the QR code
on the cover with your mobile device. As an alternative, connect to the www.
saeco.com/Avanti-app website using the device on which you wish to download
the application.
Note:
Before starting the connection procedure, make sure that the Bluetooth
function on your mobile device is active.
The GranBaristo Avanti Bluetooth function is enabled by default. If it is disabled, fol-
low the instructions below to enable it again:
PROFILE SAECO
Press the "
MENU
EDIT PROFILES
MAINTENANCE Press the "
SETTINGS
STATISTICS
SETTINGS
STAND-BY TIME
BUTTON SOUND Press the "
BLUETOOTH
RESTORE TO DEFAULT
SETTINGS
Press "
STAND-BY TIME
BUTTON SOUND
BLUETOOTH
RESTORE TO DEFAULT
" button to access the machine main menu.
" button to select "SETTINGS". Press "
" button to select "BLUETOOTH".
" to confi rm.
03 USER INSTRUCTIONS
The red light fl ashes. Press any
button to exit the stand-by mode.
" to confi rm.
Page 02 / 05