Table of Contents
Advertisement
VS-3232A 32x32 Audio Matrix Switcher Configurations
You can connect any of the following:
The 9-pin D-sub COM port of the PC to a VS-3232A unit
7.6.1.1)
Two VS-3232A units
to a VS-3232A audio matrix switcher, (see section 7.6.1.2)
Note, turning OFF the power on a unit that is connected as part of an RS-232
7.6.1.1
Connecting a PC to a VS-3232A Unit via RS-232
To connect a PC to a VS-3232A unit, using the Null-modem adapter provided
with the machine (the default):
1. Connect the RS-232 IN 9-pin D-sub rear panel port on the Master
VS-3232A unit to the Null-modem adapter and connect the Null-modem
adapter with a cable
2. Set DIP 7 OFF
1 With or without the Null-modem adapter
2 Or a multi-channel switch comprising of several VS-3232V(xl) units
3 The cable should consist of at least three straight-through wires for PINs 2, 3 and 5
4 See section 7.5
22
Figure 15: Connecting a PC to two VS-3232A Units
1
or a VS-3232Vxl video matrix switcher
daisy-chain will destroy the daisy-chain connection
3
to the RS-232 9-pin D-sub port on your PC.
4
(enabling Null-modem adapter use) on the VS-3232A unit.
With a Null-modem adapter
Set DIP 7 OFF
Without a Null-modem adapter
Set DIP 7 ON
1
KRAMER: SIMPLE CREATIVE TECHNOLOGY
(see section
2
connected
Advertisement
Table of Contents
