Download Print this page
Panasonic Viera TH-32A400G Operating Instructions

Panasonic Viera TH-32A400G Operating Instructions

Led tv
Hide thumbs Also See for Viera TH-32A400G:

Advertisement

Quick Links

Model No.
TH-32A400G TH-32A410G
TH-32A400K TH-32A410K
TH-32A400X TH-32A410M
TH-32A408K TH-32A410X
TH-32A409K
Operating Instructions
LED TV
Contents
Safety Precautions ··················· 2
Setting Up the TV ····················· 3
Connecting the TV ···················· 4
Initial Setup ····························· 6
Operating the TV ······················ 6
Watching External Inputs ··········· 7
Using the Media Player ············· 8
Using the Menu Functions ·········· 9
Additional Information ············· 12
Troubleshooting ····················· 13
Specifications ························ 14
Maintenance ························· 15
Licence ································ 15
English
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before operating this
product and retain them for future reference.
The images shown in this manual are for illustrative
purposes only.
Some illustrations are presented as conceptual images and
may be different from the actual products.
Illustrations shown may be different between models and
countries.
The illustrations for A410 series is used in this manual unless
otherwise mentioned.
Transport only in upright position
TH-32A400_408_409_410KGMX_EN.indd 1
Panasonic does not guarantee operation and
Information on Disposal in other Countries
performance of peripheral devices made by other
outside the European Union
manufacturers; and we disclaim any liability or damage
arising from operation and/or performance from usage
This symbol is only valid in the European
of such other maker's peripheral devices.
Union. If you wish to discard this product,
please contact your local authorities or
The recording and playback of content on this or any
dealer and ask for the correct method of
other device may require permission from the owner
disposal.
of the copyright or other such rights in that content.
Panasonic has no authority to and does not grant
Customer's Record
you that permission and explicitly disclaims any right,
The model number and serial number of this product
ability or intention to obtain such permission on your
may be found on its rear panel. You should note this
behalf. It is your responsibility to ensure that your use
of this or any other device complies with applicable
serial number in the space provided below and retain
copyright legislation in your country. Please refer to
this book, plus your purchase receipt, as a permanent
record of your purchase to aid in identification in
that legislation for more information on the relevant
the event of theft or loss, and for Warranty Service
laws and regulations involved or contact the owner
of the rights in the content you wish to record or
purposes.
playback.
Model Number
Panasonic and its affiliates make no representations or
Serial Number
warranties of any kind with respect to the USB devices
and the performance of communication between the
USB devices and the USB port of Panasonic products,
and expressly disclaims any and all warranties,
whether express or implied or otherwise, including
without limitation any implied warranty of fitness for a
particular purpose, any loss of data, and any implied
warranties arising from course of dealing or course of
performance of data communication between the USB
devices and the USB port of Panasonic products.
This product is licensed under the AVC patent portfolio
license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the
AVC Standard ("AVC Video") and/or (ii) decode AVC
Video that was encoded by a consumer engaged in
a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide AVC
Video. No license is granted or shall be implied for any
other use. Additional information may be obtained from
MPEG LA, LLC.
See http://www.mpegla.com.
Web Site: http://panasonic.net
© Panasonic Corporation 2014
Safety Precautions
Do not place the TV on sloped or
unstable surfaces, and ensure that
To help avoid risk of electrical shock, fire, damage or injury,
the TV does not hang over the edge
please follow the warnings and cautions below:
of the base.
Mains plug and lead
This TV is designed for table-top use.
Do not expose the TV to direct
Warning
sunlight and other sources of heat.
If you detect anything unusual,
immediately remove the mains
plug.
To prevent the spread of
Mains plug types vary
between countries.
fire, keep candles or other
open flames away from
This TV is designed to operate on:
A400G/K, A408K, A409K, A410G/K series:
this product at all times
AC 220 - 240 V, 50/60 Hz
A400X, A410M/X series:
Dangerous part / Small object
AC Auto 110 - 240V, 50/60 Hz
Insert the mains plug fully into the socket outlet.
Warning
Ensure that the mains plug is easily accessible.
This product contains possibly dangerous parts such as
Disconnect the mains plug when cleaning the TV.
plastic bags, that can be breathed in or swallowed by
Do not touch the mains plug with wet hands.
young children accidentally. Keep these parts out of reach
of young children.
Pedestal
Do not damage the mains lead.
Do not place a heavy object on
Warning
the lead.
Do not disassemble or modify the pedestal.
Caution
Do not use any pedestal other than the one provided with
Do not place the lead near a
this TV.
high temperature object.
Do not use the pedestal if it becomes warped or physically
damaged. If this occurs, contact your nearest Panasonic
Do not pull on the lead. Hold
dealer immediately.
onto the mains plug body when
During setup, make sure that all screws are securely
disconnecting the plug.
tightened.
Ensure that the TV does not suffer any impact during
Do not move the TV with the lead plugged into a socket
installation of the pedestal.
outlet.
Ensure that children do not climb onto the pedestal.
Do not twist the lead, bend it excessively or stretch it.
Install or remove the TV from the pedestal with at least two
Do not use a damaged mains plug or socket outlet.
people.
Ensure the TV does not crush the mains lead.
Install or remove the TV by the specified procedure.
Do not use any mains lead other than that provided with
this TV.
Ventilation
Take care
Caution
Allow sufficient space around the TV in order to help prevent
Warning
excessive heat, which could lead to early failure of some
Do not remove covers and never modify the TV
electronic components.
yourself as live parts are accessible when they
are removed. There are no user serviceable
Minimum distance (cm)
parts inside.
Do not expose the TV to rain or
excessive moisture. This TV must
10
not be exposed to dripping or
splashing water and objects filled
with liquid, such as vases, must
Ventilation should not be impeded
not be placed on top of or above
by covering the ventilation openings
the TV.
with items such as newspapers,
Do not insert foreign objects into the TV through the air
vents.
tablecloths and curtains.
Whether you are using a pedestal or not, always ensure
Do not use an unapproved pedestal / mounting equipment.
the vents at the bottom of the TV are not blocked and
Be sure to ask your local Panasonic dealer to perform the
there is sufficient space to enable adequate ventilation.
CLU
setup or installation of approved wall-hanging brackets.
Do not apply strong force or impact to the display panel.
TQB4GC1180
2
1/28/2014 10:45:08 AM
TH-32A400_408_409_410KGMX_EN.indd 2
Connections
Set top box
Aerial and mains lead
TV
Aerial
AV / Game equipment
RF cable
Using HDMI terminal
RF cable
TV
Mains lead
(supplied)
DVD Recorder /
VCR
You can also make similar connection via HDMI 2.
Alternative connection
Using COMPONENT terminals
Insert the mains plug firmly into place.
Equipment
When disconnecting the mains
lead, be absolutely sure to
disconnect the mains plug at the
socket outlet first.
Keep the space between the TV and RF cable to prevent
distorted image.
Do not put the RF cable close to the mains lead to avoid
noise.
Do not place the RF cable under the TV.
An aerial, correct cable (75
coaxial) and correct
terminating plug are required to obtain optimum quality
* A410M/X only: AV1 IN
Other models: AV IN
picture and sound.
If a communal aerial system is used, you may require the
Using COMPOSITE terminals
correct connection cable and plug between the wall aerial
socket and the TV.
Equipment
Your local Television Service Centre or dealer may be able
to assist you in obtaining the correct aerial system for your
particular area and the accessories required.
Any matters regarding aerial installation, upgrading of
existing systems or accessories required, and the costs
incurred, are the responsibility of you, the customer.
If the aerial is placed in the wrong location, interference
might happen.
* A410M/X only: AV1 IN
Other models: AV IN
A410M/X only:
You can also make similar connection via AV2 IN.
Speaker system
TV
F0114-0
Printed in Malaysia
5
Moving the TV
Caution
Before moving the TV, disconnect all cables.
When not in use for a long time
Caution
This TV will still consume some power even in the Off mode,
as long as the mains plug is still connected to a live socket
outlet.
Remove the mains plug from the wall socket when the TV
is not in use for a prolonged period of time.
Use conditions
Caution
This appliance is intended for use in tropical climates.
Battery for the Remote Control
Caution
Incorrect installation may cause battery leakage, corrosion
and explosion.
Replace only with the same or equivalent type.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and
manganese batteries).
Do not use rechargeable batteries (Ni-Cd, etc.).
Do not burn or break up batteries.
Do not expose batteries to excessive heat such as
sunshine, fire or the like.
Make sure you dispose of batteries correctly.
Setting Up the TV
Standard accessories
Accessories may not be placed all together. Take care not to
throw them away unintentionally.
Remote Control
N2QAYB000823
Batteries (R6) × 2
(p. 4)
Mains Lead
(p. 5)
10
Other series
A410M series
10
10
1/28/2014 10:45:08 AM
TH-32A400_408_409_410KGMX_EN.indd 3
Initial Setup
Satellite dish
When you first turn on the TV, a series of steps will pop-up
to guide you to setup your TV.
These steps are not necessary if the setup has been
Set top box
completed by your local dealer.
1
Plug the mains plug into the socket
HDMI cable
outlet, then switch on the TV
HDMI cable
Equipment
A400G/K, A408K, A409K, A410G/K series:
AC 220 - 240 V, 50/60 Hz
A400X, A410M/X series:
AC Auto 110 - 240V, 50/60 Hz
TV
2
Select your language
OSD Language
English
OK
Component video cable
3
Select your area
Channel Plan
Asia/W.Europe
OK
Audio cable
CIS/E.Europe
China
*
Hong Kong
NZ/Indonesia
CATV/Other
When selecting [CATV/Other], press OK, and then select
the Channel Plan from [Indian CATV], [South Africa],
[American System], [American CATV] or [Japan].
TV
4
Auto Tuning starts
Auto Tuning searches and stores TV channels. The sorted
channel order depends on the TV signal, the broadcasting
system and reception conditions.
Video cable
5
Select [Home]
Please select your viewing environment.
Home
Shop
OK
Audio cable
[Shop] is for shop display. If you selected [Shop], you
*
can return to the above screen at the stage of Shop
confirmation screen.
RETURN
Shop
You have selected shop mode
To change the viewing environment later on, you need
to initialise all settings by accessing [Shipping Condition]
(p. 11).
Setup is now complete and your TV is ready for
viewing.
Audio cable
Amplifier with
speaker system
Removing the pedestal from the TV
Pedestal
Be sure to remove the pedestal in the following way when
Assembly screws
using the wall-hanging bracket or repacking the TV.
× 3
1
Remove the assembly screws
2
(M4 × 15) × 4
Pull out the pedestal from the TV.
3
Remove the assembly screws
Bracket
Base
Inserting remote's batteries
Attaching the pedestal
Note the correct
1
polarity (+ or -)
Assemble the pedestal
Optional accessories
Wall-hanging bracket (not supplied)
Please contact your local Panasonic dealer to purchase
the recommended optional accessories.
Rear of the TV
a
2
Attach the TV to the pedestal
Holes for wall-hanging bracket installation
a: 200 mm
b: 200 mm
2
Screw specification
Type: M4
Depth of screw:
Minimum: 9 mm
Maximum: 14 mm
Warning
When optional accessories such as wall brackets etc.
are used, always read and follow the manufactures
1
installation and usage instructions.
Do not mount the unit directly below ceiling lights (such
as spotlights or halogen lights) which typically give off
high heat. Doing so may warp or damage plastic cabinet
parts.
When installing wall brackets you must ensure the
wall bracket is not electrically grounded to metal wall
studs. Always ensure that there are no electrical cables,
pipes etc. in the wall before you begin the wall bracket
installation.
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
3
1/28/2014 10:45:08 AM
TH-32A400_408_409_410KGMX_EN.indd 4
Operating the TV
13 Input mode selection
TV - switches to TV input mode
AV - displays [Input Selection] screen (p. 7) or
Using the remote control
press repeatedly to select the AV input mode
14 OFF TIMER
POWER
Press repeatedly to select the period after which the
MEDIA
1
PLAYER
INPUT
13
TV will turn to Standby mode automatically.
2
[0] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)
MENU
PICTURE
OFF TIMER
14
3
15 Changes multiplex sound mode (if available)
4
15
INFO
EXIT
Sound mode indicator:
5
16
: STEREO
6
: MONO
17
OK
16 Exits to the TV viewing screen
17 Cursor buttons
OPTION
RETURN
18
7
Makes selections or adjustments.
R
G
Y
B
18 Returns to the previous menu / page
8
19 ASPECT
19
ASPECT
Displays the [Aspect Selection] screen. Follow the
9
20
operation guide to select the mode.
CH
VOL
MUTE
[16:9] / [14:9] / [Just] / [4:3] / [4:3 Full] / [Zoom1] /
Select
10
[Zoom2] / [Zoom3]
You can also press the button repeatedly to select
Store
the mode.
11
20 Channel Up / Down
21 Returns to the last viewed channel
Select
About operation guide
12
21
Confirm
STILL
When operating the TV with the remote control, follow the
LAST VIEW
operation guide available at the bottom of the screen to
perform the operation you want.
Example: [Aspect Selection]
Aspect Selection
1 Switches the TV On / Standby
16:9
14:9
2 MEDIA PLAYER
(p. 8)
Just
3 Displays [Main Menu]
(p. 9)
Select
4 Selects picture mode
[Viewing Mode] (p. 9)
EXIT
Change
Press repeatedly to select.
RETURN
5 Displays Information banner
Referring to the operation guide:
6 OK
To select the mode
Confirms selections.
Change
Press after selecting channel positions to quickly
Confirm
OK
change channel.
7 Displays [Option Menu]
To change to the selected mode
Shortcuts to some setting menus for picture, sound,
etc.
OK
Follow the operation guide to select / change the
settings.
To return to the previous menu
8 Coloured buttons
RETURN
Performs multiple operations which correspond to
the operation guide displayed on the menu screen.
To exit the menu
9 Volume Up / Down
EXIT
10 Sound Mute On / Off
11 Numeric buttons
Changes channel.
When in Standby mode, switches TV On.
12 Freezes / unfreezes picture
6
Connecting the TV
External equipment and cables shown are not supplied
with this TV.
from the TV.
Ensure that the unit is disconnected from the mains
socket before attaching or disconnecting any leads.
from the bracket.
Check the type of terminals and cable plugs are correct
when connecting.
When using an HDMI cable, use the fully wired one.
Keep the TV away from electronic equipment (video
Press the hook and
equipment, etc.) or equipment with an infrared sensor.
lift the cover
Otherwise, distortion of image / sound may occur or
operation of other equipment may be interfered.
Also read the manual of the equipment being connected.
Terminals
Rear of the TV
(View from the side)
Depth of
7
screw
1
b
6
Screw for fixing the TV onto the
2
wall-hanging bracket (not supplied)
5
*
4
3
1
USB port
2
A410M/X only: AV1 IN*
Other models: AV IN*
3
HDMI 1
4
A410 series only: HDMI 2
5
AUDIO OUT
6
A410M/X only: AV2 IN
7
Aerial terminal
4
1/28/2014 10:45:08 AM
Using the TV controls
1
2
Indicators on the TV
3
: MAIN I
4
5 6 7
: SUB II
1 Displays [Input Selection] screen
On first press, the [Input Selection] screen for
control panel is displayed. Pressing the button again
will toggle cursor movement.
Displays [Main Menu] when press and hold for
3 seconds
Confirms selection (OK button) while in the menu
system
2 Channel Up / Down
(p. 12)
Cursor Up / Down
Makes selections or adjustments when in the menu
system
3 Volume Up / Down
Cursor Left / Right
Makes selections or adjustments when in the menu
system
4 Switches TV On or Standby
To completely turn Off the TV, remove the mains
plug from the wall socket.
5 Remote control signal receiver
6 C.A.T.S. (Contrast Automatic Tracking System)
sensor
Senses brightness to adjust picture quality when
[Eco Mode] in the Picture Menu is set to [On].
(p. 10)
7 Power LED
Red: Standby
Operation guide
Green: On
Watching External
Inputs
Connect the external equipment (p. 5),
then select the input corresponds to the
connected terminal.
Example:
Input Selection
TV
AV1
HDMI1
HDMI2
USB
Note
[USB] : Switches to Media Player
(p. 8)
You can label or skip each input mode (except [USB]).
"Input Labels" (p. 11)
Skipped inputs will not be displayed when the AV button
is pressed.
7

Advertisement

loading

Summary of Contents for Panasonic Viera TH-32A400G

  • Page 1 TV are not blocked and Be sure to ask your local Panasonic dealer to perform the there is sufficient space to enable adequate ventilation. setup or installation of approved wall-hanging brackets.
  • Page 2 Power consumption (Rated power / Standby power) 7 NTSC M without distortion (anamorphic). Copy-protected files cannot be played back. operation may damage the data or device. Panasonic is Low level or distorted sound Caution (NTSC 3.58/4.5 MHz) A400G/K, A408K, A409K, A410G/K series: Manufactured under license under U.S.

This manual is also suitable for:

Viera th-32a400kViera th-32a410kViera th-32a400xViera th-32a410gViera th-32a410mViera th-32a408k ... Show all