4
.22 RTC battery
CAUTION: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the laws and ordinances of your local
authority.
Removing the RTC battery
To remove the RTC battery, follow the steps below and refer to Figure 4-37.
1. Disconnect the RTC battery harness from the connector CN9300 on the sy
board.
2. Remove the insulator (RTC BATT INSULATOR) from the system board.
3. Open the insulator (RTC BATT INSULATOR) and take out the RTC battery.
RTC battery harness
CN9300
4-72 [CONFIDENTIAL] TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784)
Figure 4-37 Removing the RTC battery
Insulator
(RTC BATT INSULATOR)
RTC battery
stem
Need help?
Do you have a question about the TECRA A11 Series and is the answer not in the manual?
Questions and answers