Inserting The Batteries - OHAUS Aviator 7000 Operator's Manual

2.3.2
2.4
NiMH
Battery
11/13 Order number 72246392C
Mounting the tower
With the tower version the customer display is at eye level.
The tower must be mounted first.
1. Remove the weighing pan and turn over the scale.
2. Open the tower base cover.
3. Route the cable from the tower through the tower base.
4. Put the tower on the tower base and fix it with two screws.
5. Clip the cable connectors together.
6. Put the cables and connectors in the tower base.
7. Close the tower base cover.
8. Turn over the scale and put the weighing pan back on.

Inserting the batteries

1. Make sure that the external power supply is disconnected.
2. Remove the weighing pan.
3. Remove the battery compartment cover.
4. Turn over the scale and ensure that the battery switch is set to the
correct position:
– for rechargeable D-cell batteries: "NiMH".
– for non-rechargeable D-cell batteries: "Battery"
Operator Manual Aviator 7000
OHAUS
11