Table of Contents
Related Manuals for Matrix MD-460
Summary of Contents for Matrix MD-460
- Page 1 Product instruction manual Matrix Duo MD-460 and MD-650 The Matrix Duo has been designed to be user friendly, however we strongly recommend you take a few minutes to read through this manual to ensure correct operation. Keep this manual safe for future reference.
-
Page 2: Safety Precautions
Thank you for purchasing the Matrix Duo. Please read through this instruction booklet carefully and keep it safe in case needed for future reference. Contents Page 2 - Safety precautions Page 3 - Machine parts and stand (options extra) assembly Page 4 - Control panel and functions of digital display Page 5 - Operating instructions Page 6-8 - Loading/threading the film... -
Page 3: Stand Assembly
Machine parts and stand assembly Core adaptor Top roll shaft Heating roller Top supply roll Top stabilizer bar tension knob Safety shield Active bolt Roller pressure knob Left side cover Control panel Feed guide Right side cover Bottom roll shaft Feed table Bottom supply roll tension knob... - Page 4 Control panel and functions of the digital display Load button Temp. control knob Speed control knob RUN/STOP switch HOT/COLD switch FWD/REV switch Temperature control The temperature setting you require for laminating can vary and can be effected by many different factors, these include thickness of media, thickness and construction of laminating film, speed of the machine and temperature and humidity of the room you are working in.
-
Page 5: Operating Instructions
Hot and cold settings To change the function of the machine to either hot or cold press the HOT/COLD switch. When it is switched to hot the set temperature will show on the LCD display. When it is switched to cold, COLD will show on the LCD display. - Page 6 Loading/threading the film - Single side laminating Please follow the step by step guide below to correctly load your film; Remove the feed tray by retracting Remove the safety guard Remove the top mandrel the bolt Load the film onto the mandrel and make sure it is loaded with the film coming off the bottom of the roll with Completely unscrew the mandrel...
- Page 7 Ensure the roller pressure is in the ‘LOCK’ Lift top roller by turning roller position when running the machine pressure handle anti-clockwise Re-fit the feed tray Re-fit the plastic safety guard NOTE: SAFETY TRIP SWITCH Please note: There is a trip safety switch which means that the machine will not work if the feed tray and...
- Page 8 Loading/threading the film - Encapsulating / Double Side Laminating Remember to set the option on the back of the machine to BOTH HEAT before you begin. When encapsulating, set the Load film onto top mandrel in the Change/set the roller option to anti-curl to ‘0’...
-
Page 9: Troubleshooting
The adhesive side of the film may be facing the roller. Stop the operation, wait until the laminator has cooled down and thread the film again in the correct manner. Specification chart MODEL MD-460 MD-650 MAX LAMINATING WIDTH 460mm... - Page 10 Your Matrix Laminator rollers are covered against manufacturing defects, the warranty does not cover against any damages caused by operator misuse. Your warranty will be void if the System has been modified by a third party not approved by the manufacturer (Vivid Laminating Technologies) to carry out such alterations.
Need help?
Do you have a question about the MD-460 and is the answer not in the manual?
Questions and answers