Service Guidelines; Tools Required For Installation And Service - Sun Microsystems Sun Fire V445 Service Manual

Service Guidelines

Keep the following guidelines in mind when servicing the system:
Except for the procedures described in
only by qualified service providers.
Only power supplies, fan trays, and hard drives can be serviced while the system
is running. You must power off the system to service any other component.
Note – You must issue software commands to prepare the hard drives for removal
and installation. For more information, see
You must disconnect the AC power cords when servicing the following
components:
Tools Required for Installation and
Service
The following tools are required to install and service the system:
Screwdriver, Phillips No. 2
Adjustable wrench
Electrostatic discharge (ESD) mat, Sun part number 250-1088, or equivalent
Grounding strap, wrist or foot
The last two items help protect the system against damage due to electrostatic
discharge. For more information, see:
"Avoiding Electrostatic Discharge" on page 41
16 Sun Fire V445 Server Service Manual • February 2007
Motherboard
Power distribution board (PDB)
Advanced Lights Out Manager (ALOM) system controller card
Chapter 3, the system must be serviced
Chapter 3.