Carriage Return/Line Feed - Symbol LS4278 Quick Reference Manual

13
Note: Unlocked Pairing Mode is supported in single Point-to-Point mode
only. Refer to the Product Reference Guide for more information.
UNLOCKED PAIRING MODE (Default)
LOCKED PAIRING MODE
Pairing Methods
There are two pairing methods. The default method pairs (connects) the scanner and
cradle when the pairing bar code on the cradle is scanned. A second method pairs the
scanner and cradle when the scanner is inserted in the cradle. To enable this feature,
scan Enable Pair On Contacts below. With this feature enabled it is not necessary to
scan the pairing bar code on the cradle. If the pairing is successful, a low/high
connection beep sequence sounds a few seconds after the scanner is placed in the
cradle.
ENABLE PAIR ON CONTACTS
DISABLE PAIR ON CONTACTS (Default)

Carriage Return/Line Feed

To append a carriage return/line feed to all transmitted data, scan the following bar
codes in the order shown. To cancel this operation, the SET DEFAULTS bar code on
page 6, or refer to the Product Reference Guide.
SCAN OPTIONS
<DATA><SUFFIX>
ENTER