Table of Contents
Advertisement
Trailer Attachment
The following section provides instructions for
attaching the trailer to a bicycle with rear hub nuts
or quick release.
WARNING!
Use of the trailer without the safety strap attached
to the bicycle may result in serious injury or death.
Always attach the safety strap to the bicycle when
using the trailer.
1.
Using a wrench, remove the hub nut and
washer from the bicycle's back wheel.
Washer
Hub nut
2.
Place the tab washer on the axle. Fit the tab
into the slot on the bicycle frame dropout.
Slot
Tab
Tab
washer
3.
Place the coupler plate on the axle, in a
vertical position and the large hole down.
Align the pegs on the back of the plate with
the holes in the tab washer.
Coupler
pegs
Coupler
plate large
hole
Place the hub nut and washer back on the
4.
axle and tighten.
Washer
Hub nut
Coupler
plate
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Two Seat Bicycle Trailer and is the answer not in the manual?
Questions and answers