Di-1522 Post-Mix Plumbing; Di-1522 Pre-Mix Plumbing - Servend Ice & Beverage Dispensing Units Technician's Handbook

DI-1522 Post-mix Plumbing

SERVEND RECOMMENDED PLUMBING: DI-1522 IC
PW
PW
From Pump

DI-1522 Pre-mix Plumbing

SERVEND RECOMMENDED PLUMBING: DI-1522 PREMIX
164
Detail A
Detail A
Ambient Carbonation
Jumper tube between pre-chill
coldplate and post-chill in coldplate
S1
S2
S3
Plain Water
Carb Water
S4
S5
S6
Manifold: Change to Carbonated or
Non-carbonated water
1. Rotate plunger 180° using a 5/32" allen wrench.
2. Pull plunger up to get non-carbonated water.
3. Push plunger down to get carb. water.
4. Turn plunger back 180° to lock.
NOTE 1:
A. Plain water to the carbonator
B. Carb water to coldplate post-chill
NOTE 2:
For 5(4) vale unit:
– Inlet syrup number 6(6.5) isn't used
– Valve number 6(6.5) isn't used
FLEX
MANIFOLD
For Assistance Call
Valve Locations
3/4" NPT
Drainpan
Drain
Lines 1 & 6 are not used
Inlet Line Locations
For Assistance Call
812-246-7000
Part Number STH14 9/10
2-1-1-2 Right to Left
812-246-7000
3/4" NPT
Coldplate
Drain
Bottom View
For 5 valve unit:
Line 6 is not used
For 4 valve unit: