Related Manuals for D-Link DPR-1020
Summary of Contents for D-Link DPR-1020
- Page 1 USB MULTI-FUNCTION PRINT SERVER DPR-1020 Quick Install Guide+ Руководство по быстрой установке+ Guía de instalación rápida+ Guia de instalação rápida+ 快速安裝手冊 Petunjuk Pemasangan Cepat+...
-
Page 2: Before You Begin
Power Adapter warranty. If any of the above items are missing, please contact your reseller. ©2008 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. -
Page 3: External Features
DC Power Connector USB Port USB Port The DPR-1020’s USB port is located on the rear panel. The port can be configured using the web configurator which allows users to configure settings through their web browser. The default IP address of the DPR-1020 is automatically acquired from a DHCP server on the network. -
Page 4: Led Indicators
LED INDICATORS The top panel of the Print Server features three LED indicators: Power A steady blue light confirms that the Print Server is turned ON. A steady blue light indicates the printer is online and successfully connected to the print server. This light will also blink to indicate that data is being transferred between the print server and printer. -
Page 5: Hardware Installation
Follow the steps below to avoid any complications during the hardware installation: 1. Confirm that the printer you will use to connect to the DPR-1020 is operating correctly. 2. When you have confirmed that the printer is operating correctly, switch its power OFF. -
Page 6: Installation
PS SOFTWARE INSTALLATION PS Software (Windows Vista/XP/2003/2000) includes both PS-Link and PS- Wizard. PSLink can help you set up your printer for multi-function printing using your manufacturer’s drivers. PS-Wizard is a utility that enables you to easily add a printer to your computer. These utilities can also configure additional Print Server settings. - Page 7 PS SOFTWARE INSTALLATION After clicking Install PS Software the following screen will appear. Click Next To change the default installation location, click Browse. Click Next In this screen you can change the name of the installation folder. The default name is Software.
- Page 8 PS SOFTWARE INSTALLATION To finish the installation of the Software, click Finish. Finish Click Start To access the utilities, click > Programs > PS Software and select the utility you wish to use.
-
Page 9: Technical Support
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: Tel: 1300-766-868 24/7(24Hrs, 7days a week) technical support http://www.dlink.com.au e-mail: support@dlink.com.au India: Tel: 1800-222-002 9.00 AM to 9.00 PM. All days http://www.dlink.co.in/support/productsupport.aspx...
Need help?
Do you have a question about the DPR-1020 and is the answer not in the manual?
Questions and answers