Page 1
95Xi, 93X, 90X Total Body Trainers A ss em bl y I ns tru c ti o ns...
Page 2
Congratulations... and welcome to the world of The following Parts List and the step-by-step assembly procedures have been assembled to make the set-up of the Total Body Trainer as quick and easy as possible. Please take special note of the following important points prior to choosing a location and beginning assembly of the Total Body Trainer.
Page 3
MPORTANT AFETY NSTRUCTIONS ! DO NOT LOCATE THE ROSS RAINER OUTDOORS NEAR SWIMMING POOLS OR IN AREAS OF HIGH HUMIDITY ! DO NOT OPERATE YOUR ROSS RAINER IF IT HAS BEEN DROPPED DAMAGED OR EVEN PARTIALLY IMMERSED IN WATER F THIS OCCURS CONTACT ITNESS USTOMER...
Page 4
Rear Pivot Arm Cover Qty: 2 OK62-01012-0000 OK62-01013-0000 Left User Arm Assembly Qty: 1 Right User Arm Assembly Qty: 1 AK62-00087-0000 (Model 95Xi) AK62-00086-0000 (Model 95Xi) AK62-00091-0000 (Model 93X, 90X) AK62-00090-0000 (Model 93X, 90X) Left Bullhorn Qty: 1 Right Bullhorn Qty: 1...
Page 5
IMPORTANT! DO NOT DISCARD THE SHIP KIT LOCATED ON TOP OF THE PEDAL LEVERS. ALL NECESSARY COMPONENTS NEEDED TO COMPLETE THE INSTALLATION ARE LOCATED IN THE SHIP KIT. IMPORTANT! NE JETEZ PAS LE KIT PLACÉ SUR LE DESSUS DES LEVIERS DE PÉDALE. IL CONTIENT TOUS LES ÉLÉMENTS NÉCESSAIRES POUR L'INSTALLATION.
Page 6
Locate the DISPLAY CONSOLE (4). Position the CONSOLE near the top of the CONSOLE BRACKET. Attach all CONNECTORS (F & G) leading from the CONSOLE BRACKET to their corresponding CONNECTORS in the back of the DISPLAY CONSOLE. Feed any excess WIRE HARNESS into the CONSOLE BRACKET and place the DISPLAY CONSOLE onto the CONSOLE BRACKET aligning the mounting holes.
Need help?
Do you have a question about the 95Xi and is the answer not in the manual?
Questions and answers