Panasonic EY6405-U1 Service Manual page 5

Procedure 2A → → → → 2B → → → → 2C
Ref. No. 2C Removal or attachment of the Gear Box Block.
(Removal)
1. Turn the thrust plate to remove.
2. The internal parts of gear box block can be removed one after
another. (See Fig. 7)
(Attachment)
3. If the lock ring comes out, reassemble in the correct direction.
(See Fig. 8)
4. Start from inserting 6 pins into the driving block as shown in the
Fig. 9.
5. Assemble the other parts in reverse order as shown in the
Fig. 7.
NOTE :
Carrier, Carrier A and B, Ring Gear, and Ring Gear A have
their own correct directions for proper reassembly.
5
EY6405-U1 / EY6409-U1 / EY6432-U1