Related Manuals for Antari Z-350 FAZER
Summary of Contents for Antari Z-350 FAZER
-
Page 1: User Manual
Z-350 FAZER USER MANUAL English Français Deutsch € € € 2013 Antari Lighting and Effects Ltd. -
Page 2: Safety Information
User Manual Safety Information Please read the following safety information carefully before operating the machine. Information includes important safety information about installation, usage, and maintenance. Pay attention to all warning labels and instructions in this manual and printed on the machine. If you have questions about how to operate the machine safely, please contact your local Antari dealer for help. - Page 3 If any parts appear damaged or mishandled from shipping, notify the shipper immediately and retrain the packing material for inspection. What is included: 1 x Z-350 Fazer 1 x Power Cord 1 x User Manual Product Dimension...
-
Page 4: Product Overview
Product Overview Smoke Output Nozzle Fluid Tank Cap Fluid Level Gauge Wire Remote Socket DIP Switch (DMX Address Setting) XLR 3-Pin DMX Connector Output Level Adjustment Knob Main Power Switch Fan Speed Power Inlet Adjustment Knob... -
Page 5: Operation
Setting Up Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm open space around the machine. Step 2: Fill the fluid tank with Antari approved fluid. Step 3: Connect the machine to suitable rated power supply. To determine the power requirement for the machine refer to the label on the back of the machine. - Page 6 Rotary Knob Function SMOKE Turn haze on/off, adjust output volume from 0~100% Adjust fan speed from 20%~100% Remote Control Operation (Optional) To operate the machine by remote control, connect the remote to the microphone jack located on the rear of machine. Use the switch to turn haze on/off, and use the rotary knob to adjust the output volume from 0~100%.
-
Page 7: Service And Maintenance
Fan 21 ‚ 100% Fluid Only use Antari FLG water-based liquid for the Z-350 Fazer. The machine is tested and calibrated with this liquid to get the best output performance. Warranty will be void if any other type of liquid is used, improper use of liquid may lead to machine failure and malfunction. -
Page 8: Fuse Replacing
Fuse Replacing Disconnect AC power before replacing fuse. Only replace fuse with same type and rating. Step 1: Disconnect power cord from supply. Step 2: Use a flat-head screwdriver to release fuse holder. Step 3: Replace fuse with exact same type and rating as indicated below. Step 4: Reinsert fuse holder. -
Page 9: Technical Specifications
Technical Specifications Input voltage 110-120V 60Hz 220-240V 50Hz Fuse 100V = T6.3A 250V 110 ‚ 120V = T7A 250V 220 ‚ 240V = T4A 250V Heater 100Vac - 520W , 120Vac ‚ 800W 220Vac - 600W , 240Vac ‚ 730W Warm-up time 3.5 ‚...
Need help?
Do you have a question about the Z-350 FAZER and is the answer not in the manual?
Questions and answers