Summary of Contents for Net.Do TG24
- Page 1 TG24 / 48 LIGHTING CONTROLLER USER MANUAL ( Version: 2.0 ) Net.DO LIGHTING CONTROL EQUIPMENT CO.,LTD http://www.netdo.com.cn...
-
Page 2: Table Of Contents
24/48 dimming channels. 24 preset fader, 12 submaster fader. 96 Scenes (8 page). 24 Chases, up to 120 Steps each. Trigger mode selectable: Music synchronously, Auto. LCD display with backlight. Power supply: AC 100-240V / 50-60Hz TG24/48 LIGHTING CONTROLLER PAGE: 2... -
Page 3: Specification Parameter
SIZE 482mm x 310mm x 95mm 2 Installation TG24/48 lighting controllers’ packing chest contents items as following: One TG24/48 lighting controller: Ps: to confirm the model of the controller, please check the model number and software version number displayed on the LCD monitor when run the controller. -
Page 4: Connect The Power
One unbalanced monophonic audio input locates in the back board, the range of line level input is: -10dB ~ +10db. When audio device is plug in, the audio source is line level input. When there nothing plug in, the audio source is MIC selection. TG24/48 LIGHTING CONTROLLER PAGE: 4... -
Page 5: Operation Guide
Net.DO Lighting Control Equipment Co.,Ltd http://www.netdo.com.cn 3 Operation Guide 3.1 Panel Plot TG24/48 LIGHTING CONTROLLER PAGE: 5... -
Page 6: Fader
This fader is used to control the speed of chase when it is auto mode, ranges from 0-100%, 0% most slowly and 100% fastest. CROSS FADER: This fader is used to control the fade of chase-step, ranges from 0-100%, 0% most slowly and 100% fastest. TG24/48 LIGHTING CONTROLLER PAGE: 6... -
Page 7: Key
The audio input socket is 1/4” monophonic socket, with input line level 0dB. When audio device is plug in, the audio source is line level input. When there nothing plug in, the audio source is MIC selection. AC Power Input DMX512 Output Audio Input TG24/48 LIGHTING CONTROLLER PAGE: 7... -
Page 8: Record And Running
Eg: Edit Page 8, chase 10 -----, Turn to Submaster Page 8 and press SUBMASTER key 10. 3. Press INSERT(+) to add a Chase-step; Chase Number P-CHASE: （8.10） tol = 001 st [ Total Steps Current Step TG24/48 LIGHTING CONTROLLER PAGE: 8... -
Page 9: Running
2. Push the SUBMASTER Fader 10 to running Chase 10. Tips: Press the Submaster key to flash-running the Scene or Chase. Press the Submaster key or push the Submaster fader to convert the Chase to the TG24/48 LIGHTING CONTROLLER PAGE: 9... -
Page 10: Initializtion Of Data
(B) The steps of canceling the starting password: Repeat the above two steps. When the password is enabled, every time when the controller is started the password is needed: Press number keys 1, 2, 11, 12 at the same time. TG24/48 LIGHTING CONTROLLER PAGE: 10...
Need help?
Do you have a question about the TG24 and is the answer not in the manual?
Questions and answers