Troubleshooting - Island Oasis SB3X Service Manual

TROUBLESHOOTING

1. Inconsistent Ice Flow.
Check that Blade and Assembly are secure. Check Blade for
damage. Also check shaver belt for wear. If the ice being used is
changed, the ice flow will be affected and will have to be
readjusted.
2. Blender operates, shaver doesn't.
Disconnect Power Cord and check Ice Bowl for jamming. If okay,
connect Power Cord and press Reset Button. If problem
continues, check wiring to Shaver Motor and Relay.
3. Shaver and Blender operate, but Blades are not spinning in
Blender Cup.
Check Blender Blade assembly for frozen bearings, or check
blender belt for wear.
4. Machine is in the On position with Stop Light On. Drink
buttons will not function.
Check connection from Drink Board to Main Power Board.
Replace Drink Board, and or main Power Board.
5. Machine runs continuously and/or operates erratically
throughout its cycle.
1. See Drink Board operation, Section
II.
2. Check Main Power Board.
6. Ice mounding, machine not
blending properly.
1. Check portions on mix and liquor.
2. Machine out of adjustment (see
Section I adjustments).
SECTION IV
41