Bluetooth Device Settings - JVC KW-AVX840 Instructions Manual

Bluetooth device settings

Mobile phone
Menu items Selectable setting/item
z
Connection Connect
z
Disconnect
PIN Code Changes the PIN code of the unit.
• Touch the current PIN code, enter a new PIN code, then press [Save].
Device Name Shows the device name to be shown on the Bluetooth device — "JVC Unit."
Device Address Shows the MAC address of the unit.
1
Phone Device* Shows the phone device name.
2
Audio Device* Shows the audio device name.
z
Auto connect Off
z
On
HF/Audio Select the speakers used for Bluetooth (both phone use and audio player).
z
Front
Output
z
All
Initialize Hold [Enter] to initialize all settings you have made for using Bluetooth mobile phone and
Bluetooth audio player.
1 z
Auto Answer * Off
z
On
1 z
SMS Notify* Off
z
On
z
1
Ring Mode* System
z
Phone
Ring Tone When <Ring Mode> is set to <System>, press [Enter], then select the ring tone for
1
Change* received calls and SMS from <Tone1>, <Tone2>, <Tone3>.
z
Call Tone
z
Message Tone
1
Appears only for the phone setting screen.
*
2
Appears only for <Mode> while "BT Audio" is selected as the source.
*
Bluetooth audio player
On "BT Audio" source control screen:
:  page 51
:  page 51
: Cancels.
: The connection is automatically established with the last connected
Bluetooth device when the unit is turned on.
: From front speakers only.
: From all speakers.
: The unit does not answer the calls automatically. Answer the calls
manually.
: The unit answers the incoming calls automatically.
: The unit does not inform you of the arrival of a message.
: The unit informs you of the arrival of a message by ringing and
displaying "Receiving Message."
: Selects the ring tone set on the unit.
: Selects the ring tone set on the mobile phone. (This function may not
work depending on the mobile phone.)
: Selects the ring tone for phone calls.
: Selects the ring tone for SMS.
57
Initial: Underlined