IMPORTANT SAFETY INSTRUCTIONS Please read these instructions. All the safety and operating instructions should be read before the appliance is operated. Warnings • To reduce the risk of fi re, electric shock or damage to the television, do not expose it to dust, rain or moisture, or place any objects fi lled with liquids on or near the television.
IMPORTANT SAFETY INSTRUCTIONS Please read these instructions. All the safety and operating instructions should be read before the appliance is operated. Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays The extended use of fi xed image program material can cause a permanent “shadow image” on the LCD panel. This background image is viewable on normal programmes in the form of a stationary fi xed image.
Please read the section on SAFETY before proceeding with your installation. Thank you for purchasing this Baird TV. Remove the TV from the packaging and proceed with the following steps for best results. To fully understand the features and safety advice of your LED TV, we strongly recommend that you read the manual enclosed with your TV.
ATTACHING / DETACHING THE STAND Attaching the Stand IInsert the stand into the bottom of the LED TV body and tigten the screws. Detaching the Stand To remove the stand remove the screws in the circled area and the neck will come off .
GETTING STARTED - INITIAL SET UP 1) Connect the TV to the TV Aerial wall socket 2) Connect the power cable to the Mains Adaptor (Fig A) and the Mains Plug to the wall socket. Ensuring the wall socket is OFF, connect the DC Output of the Adaptor to the TV “DC IN”...
TV BUTTONS & SOURCE MENU Standby Power On/Off Displays the input source menu Displays Menu/OSD Channel up/down and menu up/down Volume up/down and menu left/right Red is standby mode, green when your TV is switched on. Infrared sensor for the remote control. Choosing Mode Input/Source To switch between the diff erent input/connections.
REMOTE CONTROL Viewing remote control - TV STANDBY Turn the TV ON or into standby mode. EJECT In DTV mode press to select language. In DVD mode press STANDBY to eject the disc. SOURCE Press to open the source menu. P.MODE Press to cycle through the available video picture modes.
CONNECTIONS DC IN 12V 3A Power supply Connect to portable USB device HDMI Connect the HDMI output jack of DVD/Bluray player. SCART Connect the SCART jack of VCR or DVD. PC Audio Connect to the Audio output terminal of a PC Connect to the PC-RGB Connect to the CI card RF Input...
Page 12
CONNECTIONS Connecting a Camcorder, Camera or Games Console Source should be set to Video Camera or Camcorder Yellow Video White Audio In L/R Connecting a High Defi nition (HD) Device Option 1 - via HDMI to HDMI cable A HDMI cable can output both video and audio and enables you to enjoy digital video and audio with minimal loss of quality.
CHANNEL MENU To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
PICTURE MENU To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. Tip: Only the “Personal”...
SOUND MENU AD switch To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button.
TIME MENU To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
LOCK MENU To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
SETUP MENU To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
USING THE TELEVISION AS A COMPUTER MONITOR IMPORTANT – Before connecting the computer to the television you must ensure the computer settings are correct for the television. You MUST do this using your old monitor. Windows XP Windows Vista Windows 7 How to set up for Windows XP, Windows Vista &...
PC SETTINGS To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] If you wish to make changes to any of the default settings, use the scroll buttons. To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
General Setup Page Press the D.SETUP key and then press the </> to display the general setup page when in DVD mode. NOTE: The DVD Player must be in STOP mode in order to access the “Preference Page” Press the /\ / \/ key to move the highlight to select following option. Press the OK key into following menu and then press the /\ / \/ key to select a menu item.
8 DAY TV GUIDE / USB RECORD The TV Guide is available in Digital TV mode. It provides information about forthcoming programmes (where supported by the Digital TV channel). You can view the start and end time of all programmes and on all channels for the next 7 days and set reminders.
USB RECORD - DIGITAL/DIGITAL TV MODE USB RECORD – DIGITAL/Digital TV MODE Built into this television is a USB record facility. This function is available in Digital/Digital TV mode when used in conjunction with a compatible USB memory stick or USB Hard drive. The benefi ts of this are as follows: •...
USB MODE / MEDIA PLAYER USB mode off ers playback of various diff erent types of content that you have saved on your USB Memory Stick. On switching to the USB source the above menu screen will appear. The content will be divided into Photo, Music, Movie and Text based on fi le type.
FREQUENTLY ASKED QUESTIONS General I would like to have louder Subject to the TV model and connections, it is possible to connect the TV to sound by connecting additional an external amplifi er or surround sound (subject to connections/inputs on the speakers device) as follows:- 1) Connect a COAX cable* from the TV’s COAX output to your amplifi er/...
TECHNICAL SPECIFICATION TI2402DVDBC | TI2402DVDWC Screen Screen Size 24" Resolution 1920 x 1080 Contrast Ratio 1 000:1 Brightness cd / m2 View Angle 170/160 Inputs/Out- Video Inputs 2 x HDMI, 1 x SCART, 1 x Video, 1 x YPbPr puts Audio Inputs 1 x 3.5mm jack for PC audio input, 1 x pair RCA Audio input shared for Video...
INDEX 7 DAY TV GUIDE / USB RECORD ............22 PC Settings ....................21 Attaching/Detaching the stand and wall mounting ....7 Picture menu ..................... 14 CONNECTIONS ..................11-12 REMOTE CONTROL .................. 11 CONTENTS ....................5 Setup menu ....................19 DIGITAL SWITCHOVER ................
Need help?
Do you have a question about the TI2402DVDBC and is the answer not in the manual?
Questions and answers