Miele G5930 Operating Instructions Manual page 20

Before using for the first time
– The dishwasher must be
programmed for the water hardness
in your area.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– Where the water hardness fluctuates,
e.g. between 6.7 - 9.0 mmol/l (27 -
30 °d - German scale), always
programme the dishwasher to the
higher value (9.0 mmol/l in this
example).
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Enter the water hardness below:
mmol/l or °d
20
The dishwasher is programmed at the
factory for a water hardness level of
2.7 mmol/l (15 °d - German scale).
^ Select the water hardness you want,
and confirm your selection with
See "Programming the water
hardness level" for further
information.
These settings will be saved in memory
after the dishwasher has been through
one complete programme.
Finally, two messages will appear in the
display.
After confirming these,
Insufficient salt
and
in the display to remind you to fill the
salt and rinse aid reservoirs. See
relevant sections on how to do this.
After you have confirmed these
OK
messages with
change to show the main menu.
OK
Rinse aid low
may then appear
, the display will
.