Pioneer MJ-D508 Service Manual page 54

MJ-D508
Removal of the Head Lifter
1 Remove the Lifter SP.
2 Tilt the Head Lifter to the rear and push part A to disengage it.
Head Lifter
2
Push
Part A
54
1
Lifter SP
Head Lifter
Servo Base
Head Lifter Installation
1 Install part A in the Servo Base with the Head Lifter tilted to the
back.
2 Match the Head Lifter and the Servo Base as shown in the figure,
and then engage part B.
3 While holding part B with your hand, tilt the Head Lifter to the
front and install the Lifter SP.
Head Lifter
2
Part B
Matching
Part B
Position
1
Part A
3
Push