Radio Tuning And Programming; Introduction; Cps Programming Setup - Motorola GM338 Service Manual

Section 4

RADIO TUNING AND PROGRAMMING

1.0

Introduction

This chapter provides an overview of the Customer Programming Software (CPS) and tuner
program which are designed for use in a Windows 95/98 environment. These programs are
available in separate kits as listed in the Table 4-1. An Installation instruction manual is also
included with each kit.
NOTE Refer to the appropriate program on-line help files for the programming procedures.
Customer Programming Software (CPS) CD
Customer Programming Software (CPS) Disk
2.0

CPS Programming Setup

The CPS programming setups, shown in Figure 4-1 through Figure 4-3, are used to program the
radio.
NOTE Refer to appropriate program on-line help files for the programming procedures.
Programming
Cable
RKN4081
Table 4-1 Software Installation Kits Radio Tuning Setup
Description
ACC
DC
+13,2VDC
RF
Supply
RIB
RLN-4008
DB25
Figure 4-1 CPS Programming Setup with RIB
PMVN4043D
PMVN4031D
Power
DB15
Tx Data
Rx
Data
Gnd
Cable 3080369B72 (9 PIN)
Cable 3080369B71 (25 PIN)
Kit Number
ZWG0130338-0
4-1