Customer Programming Software (Apx Cps) - Technisonic Industries Limited TDFM-9300 Operating Instructions Manual

2.16 APX CUSTOMER PROGRAMMING SOFTWARE (APX CPS™)
Programming the Bands in the TDFM-9300 is usually done with the use of third party
programming software. Customer programming software, or "APX CPS," must be supplied by
Motorola. However, conventional analog or P25 channels can be programmed at the front panel.
See section 2.19 for details.
A Programming cable "PC-9000" is required to connect the computer to the TDFM-9300. Bands 1
- 4 in the TDFM-9300 are considered an APX-7000 portable by the APX CPS™ software. To
program a band in the transceiver, it must be selected by pressing the appropriate band select
key before running the APX CPS™. Follow the instructions supplied with the APX CPS™.
The APX CPS Programming software (P/N RVN5224) must be purchased from Motorola On Line
(MOL).
For instructions on ordering Motorola parts and APX CPS software see Technical Information
Bulletin TIBFM 18-01.
This document is available on the Technisonic website at www.til.ca. On the main page, hover
the cursor over "Project 25 Airborne FM." A pull-down menu should appear. Click the TDFM-9300
link to go directly to the TDFM-9300 page and click the link for "APX CPS Programming
Software/Cables Ordering Guide." Refer to the section for Type III or "A" modules.
The following cables for support of the TDFM-9300 can be purchased from Technisonic:
P/N 127499
P/N 127500
Programming the Analog Band 5 of the TDFM-9300 requires the Technisonic MultiTDP software.
This software is free and is available from the Technisonic website www.til.ca.
Click on the "Programming Software" section and select "MultiTDP" software for download. Multi
TDP also uses the programming cable PC 9000.
Some TDFM-9300s may contain Type II modules. This is a non-standard configuration. "Astro 25
Portable CPS" (P/N RVN4181) with the PC-9000 is the only way to load channel information into
those bands.
If encryption keys need to be loaded via a KVL-3000+ or KVL 4000 keyloader, cable P/N 127500
may be also be obtained from Technisonic. This keyloader cable will plug into the front mini DIN
connector of the TDFM-9300 transceiver.
TDFM-9300 Operating Instructions
TECHNISONIC INDUSTRIES LIMITED
www.til.ca
Download/Programming Cable (See Figure 2.2).
Encryption Keyload Cable (See Figure 2.3).
2-8
TiL 13RE470 Rev. B