Setup" Menu - Silvercrest LT 2310 User Manual And Service Information

"Setup" Menu

Here you select the menus' display language.
Language
OSD duration Select the display time for the OSD menu between 5 and 60 seconds.
OSD halftone Select a density for the OSD menu background. Set a lower value to obtain a darker
background for the OSD menu. Set a higher value in order to better distinguish it
from the TV picture displayed in background.
Information
Select this option to display which signal source is currently selected for the main
picture and which signal source is currently selected for the subpicture in picture-in-
picture mode. Furthermore, the firmware version will also be displayed.
Reset Select this option to delete all personal settings including all TV channels and reset
the factory-default values.
The child lock lets you protect the device against being powered-on. It will only be
Lock
possible to operate the device after entering the correct password.
This factory-default password is "0000".
New password
Confirm
Lock
Enter the new password if you want to change the old one.
For security reasons, confirm the password entered into the
"New password" field.
Select the "On" option to enable the system lock. After this,
operating the TV set will only be possible after entering the cor-
rect password. Or select "Off" to disable the lock.
Signal Source "TV"
23