Specifications - JBL NORTHRIDGE E150P Owner's Manual

SPECIFICATIONS

E150P
Amplifier
Power (RMS): 150 Watts
Peak Dynamic
Power † : 250 Watts
Driver: 10" PolyPlas
Inputs: Line Level (switchable to LFE)
and Speaker Level with
5-way binding posts
Low-Pass
Frequency: Variable from 50Hz to 150Hz
Frequency
Response: 27Hz – Low-pass
crossover setting
Dimensions
(H x W x D): 17-3/4" x 12-1/4" x 14-1/2"
(451mm x 311mm x 368mm)
Weight: 33.5 lb/15.2kg
†
The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measured
across the output of a resistive load equal to minimum impedance of the transducer, using a 50Hz
sine wave burst, 3 cycles on, 17 cycles off.
PRO SOUND COMES HOME
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
www.jbl.com
© 2003 Harman International Industries, Incorporated
JBL is a registered trademark of Harman International Industries, Incorporated.
™
™
Part No. 350883-001
E250P
250 Watts
550 Watts
™
12" PolyPlas
Line Level (switchable to LFE)
and Speaker Level with
5-way binding posts
Variable from 50Hz to 150Hz
25Hz – Low-pass
crossover setting
19-3/4" x 14-3/8" x 16-1/2"
(502mm x 365mm x 419mm)
43 lb/19.5kg
* Trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
All features and specifications are subject to change without notice.