Chapter 4 Getting Started; Starting Matworx 32; Figure 4-1 Starting Matworx 32 - NEC NEAX 2000 IVS User Manual

Chapter 4
In this chapter you learn about the following:

Starting MATWorX 32

Connecting to a NEAX2000 IVS PBX
Exiting MATWorX 32
Starting MATWorX 32
This procedure explains how to launch MATWorX 32
each time you want to run the program.
Note:
1. Launch Microsoft Windows 95 or NT 4.0 or
higher on your computer.
2. Select Programs / MATWorX 32 / MATWorX
32 from the Start taskbar (Figure 4-1).
MATWorX 32 User's Guide
NDA-24215 Revision 1.0
Getting Started
Before you can use MATWorX 32 to program
a NEAX2000 IVS, you must configure a
communication link between your PC and
the PBX. Refer to "Connecting to a
NEAX2000 IVS PBX" on page 29.

Figure 4-1 Starting MATWorX 32

Getting Started
Page 27