Related Manuals for Scorpio MotoSecure SR-i900 Series
Summary of Contents for Scorpio MotoSecure SR-i900 Series
- Page 1 SR-i900 Series Phone (480)951-1109 Aritronix Ltd 16055 N. Dial Blvd. Suite B-10 Scottsdale, AZ 85260 V9.3...
-
Page 3: Important Information
Important Information FCC Notice Save this information for future use. Installation Date of purchase _____/_____/_____ This device complies with Part 15 of FCC rules. Operation is subject to the following two Place of purchase ______________________ conditions: (1) This device may not cause harmful interference, and (2) This device must User’s Guide ______________________... -
Page 4: Table Of Contents
Transceiver Battery Status Motorcycle Battery Status Additional Information What should you do if you experience a problem with a Scorpio product? Transceiver Back Light Sensor Memory display First contact Aritronix, Ltd [Proof of purchase, installer and motorcycle information will be requested]. If... -
Page 5: Troubleshooting Guide
Troubleshooting guide Manual Override Procedure Programming Personal Override Code Problem Possible Cause Solution Enter Programming Mode Will not arm Verify connection from MCM to RFID Select number of flashes for Code RFID antenna not connected antenna Using Code in case of lost remote Verify connection to power lead and Power or ground not connected Transceiver Information... -
Page 6: Installation
Installation Components Component Check List TRS-9 MCM-9 RFID antenna Appendix AC Adapter GEN-1 TRS-9 Adapter GEN-1(Bag) Transceiver T-taps x4 ACC-1(Bag) Velcro Pieces x2 ACC-1 Zip Ties x4 Dust Cap x1 HAR-1 (Bag) MCM-9 RFID HAR-1 antenna Planning the Installation Check that your motorcycle battery is fully charged. Check the layout of the motorcycle for placement of components. -
Page 7: Installation Diagram
--------------------- Installation Diagram --------------------... -
Page 8: Installation Warnings And Notes
Installation Warnings and Notes Ignition / Engine Control Wire Options: : Connect the (HAR-1) harness to the MCM only after installation is completed. Make sure remote is Option #1: Positive lead wire on fuel pump closed to bike to avoid a trigger. Option #2: Positive lead wire on fuel injection system Option #3: Positive wire that goes to the ignition fuse in fuse box. -
Page 9: Color Code Chart
Ignition Disable / Anti-hijack Module (RID-5) --------------------- Skip this page if using Factory Connector Kit -------------------- Color Codes: Installation (Color codes are not always valid. Always verify before making connections) Cut the Ignition / Engine control wire (refer to options on page 22) Ground (-) Tail Light Left Turn Signal... -
Page 10: User's Guide
Back-up Battery (BAT-5) User’s Guide The back-up battery provides the system the ability to transmit information and activate the siren when power is interrupted. If power is ever interrupted while the system is activated the back-up Charging Instructions battery will be engaged. The transceiver will receive a trigger and the siren will sound in 30 We recommend that the transceiver be charged second increments. -
Page 11: Operating Instructions
Perimeter Sensor (SN-5) Operating Instructions The SR-i900, by default, will be in auto arm mode and will activate with the perimeter sensor off and the siren on, five seconds after turning the ignition key off. Mounting the SN-5 The Perimeter sensor uses high frequency microwave technology to detect mass density movement Auto Arm Auto Disarm around the motorcycle. -
Page 12: Programming And Customizing Instructions
Programming and Customizing Instructions Entering Programming Mode Programmable Press button 2 Press button 2 options will be again to scroll Twice quickly displayed. through to enter The selected programmable Optional Accessories: programming icon will flash options mode Perimeter Sensor (SN-5) Press button 1 Back-up Battery (BAT-5) to select icon... -
Page 13: Selecting Transceiver Alert Type
Selecting Transceiver Alert Type (Audible/Silent/Vibrate) Transceiver Battery Information Enter programming mode. Scroll to the the icon, press button 1 to select. The LCD will display The receiver consists of two functions RFID functions and Two-way FM communication. the current settings. To program follow these steps: –... -
Page 14: Selecting Siren Default
Selecting Siren Default RCS (Range Confirmation Signal) If the transceiver is within range of the MCM and the alarm is activated, the LCD will display icon. Enter programming mode. Scroll to the icon and press button 1 to enter the siren menu. The If the transceiver does not receive the RCS;... -
Page 15: Encoding The Transceiver
Encoding a Transceiver Transceiver Information Note: The transceivers are programmed from the factory. Encoding is only necessary should Alarm Triggers the transceiver lose its code and will not arm or disarm the security system or if a second or replacement remote is obtained. When the system is triggered, the siren will sound and the turn signal lights will flash. -
Page 16: Additional Information
Additional Information Manual Override Procedure Sensor Memory Display Programming Personal Override code (This feature will work on most but not all bikes) When the system is disarmed the turn signals will flash to indicate if there has been an alarm trigger. A personal override code will be a sequence of left –...
Need help?
Do you have a question about the MotoSecure SR-i900 Series and is the answer not in the manual?
Questions and answers