Ambient Conditions; Temperature/Humidity; Vibration; Shock - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

1.2.9 Ambient Conditions

1.2.9.1 Temperature/Humidity

Table 1-19. Temperature/Humidity
Condition
During operation
During storage
During transport
Note *1: 120 hours max. at 60°C, one month max. at 40°C
*2: No condensation. These values are applicable only within the range as shown below.
Humidity (%)
Figure 1-2. Environmental Conditions: Temperature/Humidity

1.2.9.2 Vibration

During operation: 0.15G, 10 ~ 55Hz X,Y and Z directions
During storage: 0.50G, 10 ~ 55Hz X,Y and Z directions
Product Description
Temperature* 1 Humidity*
10 ~ 35°C 20 ~ 80%
-20 ~ 40°C 20 ~ 85%
-20 ~ 60°C 5 ~ 85%
Temperature (°C)

1.2.9.3 Shock

During operation:
During storage:
NOTE 1: For storage, check that the print head is capped.
2: Before transportation, check that the print head is capped, remove the ink
2
cartridges, and close the ink cartridge cover .
3: If the power to the printer is OFF with the printer head uncapped, turn the
power ON with the ink cartridges installed. Then wait until capping is
completed, and turn the power OFF.
4: If the printer is left standing at temperature of -15°C or below, the ink in the
print head and ink cartridges will freeze. If the ink is frozen, leave the printer
standing at temperature of 25°C for more than three hours before its use.
Basic Specifications
1G, 1ms max. X,Y and Z directions
2G, 2ms max. X,Y and Z directions
Revision A
24