Storing A System/Station Speed Dial Number; Advanced Speed Dial Operation - Toshiba DP5000-Series User Manual

Storing a System/Station Speed Dial Number

1. Dial . The display shows "SPEED DIAL" and you hear Entry Tone.
#66
2. Dial the Station Speed Dial number (100~199) or System Speed Dial number
(200~999). The LCD shows your digits and you hear Entry Tone.
3. Dial the telephone number to be stored +
codes. The LCD shows "SPEED DIAL" + the Speed Dial Number + destination
+ #. You hear Success Tone.
4. Lift handset.
5. To enter another number repeat steps 1-4. Refer to
Example: To store a Station Speed Dial number to Speed dial location 100, dial
+
#66 100

Advanced Speed Dial Operation

Special Characters
SD numbers may include
cial characters, see
Long SD Numbers
Up to 32 digits can be stored in one SD location. If you exceed 32 digits, the excess
digits are automatically stored in the next sequential SD location. If SD 100 contains
40 digits, then 8 of those digits would be stored in SD 101. If you save other digits
to SD101 they will over-write the eight digits automatically stored there.
+ +
99495833000
~ , , *
0 9 #
page 87.
.
Include any required access and area
#
Table 9
#
and Pause. For an example on how to use spe-
Strata CIX DP5000-series Telephone UG
below.
01/08