Facility Names And Functions (Front) - Hitachi CU-HD1500 Operating Instructions Manual

Facility names and functions (Front)

4
1
1 CCU POWER switch
CCU power on/off switch.
2 CCU POWER LED
Lights when power is on.
3 CABLE CHECK LED
OK: CAMERA POWER switch
operated.
OPEN: Fiber cable not connected.
SHORT: Excess current in fiber cable.
Note: CAMERA POWER switch
inoperative when OPEN, SHORT LED is
lighted.
4 CAMERA POWER switch
The switch lights during camera power on.
When the camera power is off, only one
channel intercom (CH1) is available.
Press the switch for three seconds or more, to
turn off the camera power.
5 GL ON LED
Lights during genlock operation.
Note: When a different frame rate signal is
input for genlock, the LED blinks and the
signal is ignored.
2 3 31 6
5
4 can be
4
7
6 R TALLY LED
Lights at red tally input or when CALL signal is
sent from camera.
7 G TALLY LED
Lights at green tally input.
8 CALL button
Press to call the camera.
9 INTERCOM LEVEL control
is
Adjusts intercom listening volume.
10 TALK ON/OFF switch
Intercom microphone on/off switch.
11 PRIVATE/COMM switch
PRIVATE: Communicate with camera only
COMM: Communicate with entire system
12 Intercom connector (XLR,5P)
Connection for optional MT-12MF headset.
4
11 9
8 10
12