Targa Visionary LCD 19-4 Wide Operating Notes First of all, many thanks for choosing this high-end multiscan monitor. Before starting installation, please read this manual completely. Intended Use This TFT monitor is an IT electronic device. It may only be used for private use, not industrial or other commercial purposes.
Targa Visionary LCD 19-4 Wide Safety Information During the manufacturing and testing of this monitor, the safety of the future user was our main goal. However, inadequate operation or installation can cause damage to the device and harm to the user.
Page 5
Targa Visionary LCD 19-4 Wide • Do not open the monitor’s housing. The high-voltage components inside the device may produce an electric shock even after the power cord has been disconnected. • Do not use the device if the casing is damaged. If this happens, it must first be examined by authorized service personnel.
Targa Visionary LCD 19-4 Wide • If you notice any smoke, unusual noise or strange smells, switch off the LCD display immediately and pull the plug out from the wall outlet. Contact customer service. It is very dangerous to continue using the LCD display under these conditions.
Targa Visionary LCD 19-4 Wide Getting Started Mount the supplied socket to the base of your LCD 19-4 Wide as indicated on the bottom of the base. Please check that delivery contents are complete using the list below: 1 - Monitor...
Targa Visionary LCD 19-4 Wide Back Panel Connectors Quick Guide 1. Connecting the Video Cable Power your monitor and computer off. Use the VGA cable (2) to connect the computer to the port (8) of the monitor. 2. Connecting the Audio Cable Use the audio cable (3) to connect the computer’s Audio Out...
Targa Visionary LCD 19-4 Wide Setting the Resolution The recommended screen resolution for your LCD 19-4 Wide is 1440 x 900 (max. refresh rate 60 Hz). In the following we will ® explain the resolution setting for the operating systems Windows XP and Windows Vista™.
Targa Visionary LCD 19-4 Wide Front Panel Controls 11. Display / hide the OSD menu. 12. Decrease value / navigate downwards 13. Increase value / navigate upwards 14. To confirm the settings 15. Power On/Off 16. Power indicator...
Targa Visionary LCD 19-4 Wide Setting the Menu Language You can display the OSD (On Screen Display) menu in your local language. Proceed as follows: 1. Press the button 1 (11) on the monitor. 2. Press the button (12) to select the menu option “Setup Menu”.
Targa Visionary LCD 19-4 Wide Button Function Overview Show/hide main menu Press once to open the brightness setting. Reduces the brightness. Increases the brightness. 2 Opens the contrast setting. 1 Exits the setting. Press once to open the contrast setting.
Targa Visionary LCD 19-4 Wide OSD Menu Via the OSD menu you can access multiple settings to customize the LCD 19-4 Wide according to your and your computer’s requirements. Use the buttons 11 to 14 (as described on page 9) to navigate the menu.
Page 14
Targa Visionary LCD 19-4 Wide Color Adjust Choose between the following options: 9300K: Adds blue to the picture achieving a cooler white. 6500K: Adds red to the picture achieving a warmer white. 5400K: Adds green to the picture achieving a darker colour tint.
Page 15
Targa Visionary LCD 19-4 Wide Language Select: Here you select the menu language. Resolution Notice: If you enable this function, a message will remind you every 30 seconds to set the optimum picture resolution. This message appears only if the set resolution does not match the recommended resolution of 1440x900.
Targa Visionary LCD 19-4 Wide Advanced Supported resolutions VESA 640 x 480 @ 75Hz 640 x 480 @ 67Hz 640 x 480 @ 70Hz 720 x 400 @ 70Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz...
Targa Visionary LCD 19-4 Wide Wall-Mounting You can mount your LCD 19-4 Wide to the wall by using a VESA wall mount with a 100 x 100 mm receptacle. To do so, disassemble the base as follows: 1. Power the device off and unplug all cables and connectors.
Targa Visionary LCD 19-4 Wide Troubleshooting No power Make sure that the power cord is properly connected to the wall outlet and that the cables to the monitor are fixed properly into their respective ports. Connect a different electrical appliance to the wall outlet to verify that it is working properly.
Page 20
Targa Visionary LCD 19-4 Wide Type 1: Continuous lighting pixel (a bright, white dot), even when it should not light. Type 2: Non-lighting pixel (a dark or black dot) even when it should light. Type 3: Abnormal or defective sub-pixels of the basic colours (e.g.
Need help?
Do you have a question about the 19" and is the answer not in the manual?
Questions and answers