Setting The Tx Inhibit - Yaesu DR-1 Operating Manual

Repeater Operation

Setting the TX Inhibit

1
Touch [SETUP] on the operation mode screen
The setup mode screen will appear.
2
Touch [F] in the setup mode screen
The setup menu will appear.
3
Touch [MODE/REMOTE]
The menu list will appear.
4
Select [TX INHIBIT]
5
Touch [TX INHIBIT]
The set value will change between [OFF] and [ON] each time it is touched.
ON OFF
Disable Enable
transmission transmission
Tip Factory default: OFF
Note When [TX INHIBIT] is set to "ON", all transmit action will be disabled.
6
Touch [BACK]
The setting is saved and the display will return to the setup menu.
22