Cable Replacement - Wacom Cintiq 24HD touch User Manual

CABLE REPLACEMENT

The connection cables (DVI-D, DisplayPort, USB, and power) come pre-installed on your Cintiq.
If using a DisplayPort connection, access the DisplayPort cable by removing the back cover from the
display stand.
1. Remove the screws (qty 4, Phillips) from the back cover of the display stand. Remove the back cover.
2. Extract the DisplayPort cable and set it within the center cable channel. Tuck the DVI-D cable into the
stand for a clean appearance.
Screw type: Phillips, flat fillister head,
M3-6, black
3. Replace the back cover and secure using the original screws.
Contents Index
Contents Index
28
28