Cable Removal And Replacement - Wacom Cintiq 22HD User Manual

CABLE REMOVAL AND REPLACEMENT

If you should need to remove or replace a Cintiq cable, follow the below procedure.
Remove a cable:
1. Turn off your computer and power off Cintiq. Disconnect all cables from between the pen display and
your computer.
2. Remove Cintiq from the display
a cloth spread across a desktop).
3. Remove the bearing hub by unscrewing the four bearing hub attachment screws. Carefully separate the
bearing halves and remove the bearing stopper to free up the cabling. For details, refer to the
instructions found in
4. Loosen the rear cover screws and lift the cover away from the pen display.
5. Remove the cable clip and unseat the cable.
6. If the cable you wish to remove has thumbscrews, loosen them. Disconnect and remove the cable.
Contents Index
stand. Place the pen display face down on a flat, soft surface (such as
using an alternate mount or
Cable clip
Contents Index
stand.
Cable seats
94
Connectors are DVI-I, USB,
and power.
94