Connecting A Tv; Tvs That Support Audio Return Channel (Arc); Tvs That Do Not Support Audio Return Channel (Arc) - Yamaha YSP-2500 Owner's Manual

Connecting a TV

Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit.
• Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m is recommended to prevent degradation of signal quality.
• For playback of 3D and 4K video content, use a high-speed HDMI cable.

TVs that support Audio Return Channel (ARC)

Connect the TV to the unit with an HDMI cable (not supplied).
HDMI OUT (ARC) jack
Center unit (rear)
HDMI
OUT (ARC)
SYSTEM SUBWOOFER R L AUX2 TV OPTICAL
OUT (ARC) IN1 IN2 IN3
CONNECTOR OUT AUX1
When connecting a TV that supports Audio Return Channel (ARC), activate the HDMI
control function (p. 59).
Audio Return Channel (ARC)
ARC enables input and output of audio signals via a single HDMI cable. If the TV supports ARC, audio
signals from the TV can be input to this unit via the same HDMI cable used to output video signals from
this unit to the TV.
• Use an ARC-compatible HDMI cable.
HDMI input
HDMI
(ARC)
HDMI HDMI
TV

TVs that do not support Audio Return Channel (ARC)

Connect the TV to the unit with an HDMI cable (not supplied) and an optical cable.
HDMI OUT (ARC) jack
Center unit (rear)
HDMI
OUT (ARC)
SYSTEM SUBWOOFER R L AUX2 TV OPTICAL
OUT (ARC) IN1 IN2 IN3
CONNECTOR OUT AUX1
O
TV
TV jack
1. Remove the cap 2. Check the direction of
the plug
• TVs not equipped with an optical jack
Audio content from the TV can be input via the AUX2 coaxial digital or AUX1 analog jack. Set "TV INPUT"
in the setup menu to "COAXIAL [AUX2]" or "ANALOG [AUX1]" accordingly (p. 60).
HDMI input
HDMI
HDMI HDMI
OPTICAL
O
Audio output
TV
(digital optical)
PREPARATIONS ➤ Connections
25
En