Adjusting The Door Springs; Securing The Dishwasher To The Countertop - Miele G 879 SCVi Operating Instructions Manual

6. Adjusting the door springs.

Open the dishwasher door halfway.
If the door remains in this position when
released, the springs are adjusted cor-
rectly.
If the door drops, the tension on the
springs needs to be increased.
If it closes on its own, the tension on
the springs needs to be decreased.
The adjusting screw is located behind
the door in the upper front strip, on the
left hand side of the dishwasher.
To adjust the door springs use a T20
TORX screwdriver and turn the
screw:
- clockwise to increase the tension
- counterclockwise to decrease the
tension.
7. Securing the dishwasher
to the countertop.
Once the panel is installed and the
dishwasher has been positioned, it
must be firmly secured to the counter-
top.
Insert one mounting bracket into
each of the slots located at the left
and right side of the machine top.
Push the machine into its recess and
if necessary, raise the dishwasher by
extending the feet until it just
touches the underside of the counter-
top.
If a steam deflector is installed
under the countertop, the bracket
holes must align with the slots in the
deflector.
Installation
59