PURSUIT 3070 CENTER CONSOLE Owner's Manual page 67

T-Top (Optional)
The Pursuit T-top is made of welded anodized aluminum and is designed to accommodate radio
antennas, radar antennas and navigation lights. It is equipped with an overhead storage
compartment for life jackets and other soft, light items and a courtesy light activated by a switch
in the helm. It could also be equipped with optional top gun outriggers and/or rod holders.
The T-top is not designed to support the additional weight of items like an instrument locker or
a life raft. Radar and electronics antennas must be mounted near the center section of the T-top
in the area above the legs. Do not mount any antennas or equipment to the brow area forward
of the front legs or to the rear of the top. The T-top is not design to support the weight of
accessories in these areas.
The warranty for the T-top will be void if the top is modified in any way or heavy accessories
like life rafts, or electronics lockers are mounted to the top. Additionally, if items like radar
antennas spotlights and other accessories are mounted in the wrong location, the warranty could
be void. If you intend to add equipment or make modifications to the T-top, you should contact
Pursuit Customer Relations to make sure the equipment you would like to add or the intended
modification will not void the warranty on the T-top.
If an after market T-top is installed, it must be designed with legs that are bolted to the console
and the cockpit sole on either side of console cooler and to the top and top rear corners of the
leaning post. There is aluminum plates or wood reinforcement in the laminate in these areas for
securing the T-top leg bases. Both front legs should also have brackets that are thru bolted to the
console just below the windshield to provide additional stiffening for the T-top. If you intend
to install an after market T-top on your boat, please contact your dealer or Pursuit Customer
Relations.
3070 CENTER CONSOLE
9-7