Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ozito ORBITAL SANDER
Summary of Contents for Ozito ORBITAL SANDER
- Page 1 WHAT’S IN THE BOX ORBITAL SANDER Orbital Sander 1/2 SHEET INSTRUCTION MANUAL SPECIFICATIONS Sanding Sheet x 3 Input: 230-240V ~ 50Hz Power: 350W No Load Speed: 12,000 /min Pad Shape: 1/2 Sheet Pad Size: 230 x 115mm Weight: 2.05kg ozito.com.au...
-
Page 2: Know Your Product
KNOW YOUR PRODUCT SETUP & PREPARATION ORBITAL SANDER 1. ATTACHING SANDPAPER 1 Front Handle 5 Rear Handle 2 Metal Base Plate 6 Dust Canister 3 Spring Clamp Ensure the tool is disconnected from the power supply before performing any of the following operations. -
Page 3: Operation
OPERATION 2. DUST CANISTER 3. CONTROLS The tool is recommended for use with a residual current Install device with a rated residual current of 30mA or less. 1. Push the dust 1. Connect the tool to the mains power supply. canister onto the dust extraction port 2. - Page 4 4. SANDING 5. TIPS • Never force the sander. The weight of the sander supplies 1. Secure the material to be sanded. adequate pressure, allowing the sandpaper to do the work. Applying additional pressure will slow the motor, rapidly wear the sandpaper, and greatly reduce the sander speed.
-
Page 5: Maintenance
Medium grit may then be used to remove scratches left by the coarser Note: Ozito Industries will not be responsible for any grit. Finer grit is then used to finish the surface. Always continue sanding with damage or injuries caused by the repair of the sander each grade of sandpaper until the surface is uniform. - Page 6 Tool: 1/2Sheet Orbital Sander SPARE PARTS Model No. HSS-5000 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. On/off Switch SPHSS5000-05...
-
Page 7: Electrical Safety
Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. -
Page 8: Warranty
• Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0713...
Need help?
Do you have a question about the ORBITAL SANDER and is the answer not in the manual?
Questions and answers