Customizing Power And Operation - Epson PowerLite S10+ User Manual

Customizing Power and Operation

You can use the Extended menu to customize the way the projector
displays images, enable Direct Power On, turn sleep mode on or off,
and customize other projector operations.
■
Display
Lets you turn screen messages on or off.
Messages:
Display Background:
, or when no image signal is available.
Blue Logo
Enables or disables display of the startup (User's
Startup Screen:
Logo) screen when the projector is turned on.
Sets the screen background to
A/V Mute:
when the
A/V Mute
■ User's Logo
Create a custom startup screen, as described on page 80.
■ Projection
Select (to project onto the front of a screen),
Front
(when the projector is mounted upside-down from the ceiling),
(to project from behind onto a transparent screen), or
Rear
(to project from behind onto a transparent screen
Rear/Ceiling
when the projector is mounted upside-down from the ceiling).
■
Operation
Sets the screen background to
Black
button is pressed.
,
Black
, , or
Blue Logo
Front/Ceiling
Fine-Tuning the Projector
note
If you hold down the
button on the
A/V Mute
remote control for about five
seconds, you switch between
and
Front Front/Ceiling
or and
Rear Rear/Ceiling
If is
Direct Power On
enabled, the power cord is
connected, and a power
outage occurs, the projector
will start when the power is
restored.
75
.