This manual is for use with Jackson Grills 3 & 4 Burner Models Warning: Please read and understand the contents of this manual fully before operating. Failure to do so may result in fire or explosion. Homeowners should retain these instructions.
A special message to our customers Thank you for choosing the Jackson Grill for your new gas grill. This appliance is designed with quality components and we are confident that it will provide you with years of excellent operation. Please take the time to read the whole manual and familiarize yourself with all of the features of the Jackson Grill.
SAFETY Your new Jackson Grill barbeque is a safe, convenient appliance when maintained properly. As with all gas-fired appliances, certain safety must be observed. Failure to follow these precautions damage or injury. If you have any questions concerns assembly or operation of this appliance,...
10 cubic feet per hour. combustible The LP Gas Cylinder is not included with the Gas Grill. Be sure to purchase one with the QCC valve. recognized by the external threads on the inlet port of the valve.
Page 5
4. Keep out of reach of small children. As well, the 5. When the LP gas cylinder is connected to the gas grill, the LP gas cylinder must be stored outside in a well- ventilated area. 6. Keep the ventilation openings for the...
PERATION 1. Never connect your gas grill to an LP cylinder without provided, never unregulated gas supply. regulator supplied with the appliance must be used. 2. Always leak test the LP gas cylinder regulator connection connecting the LP gas cylinder to the appliance.
Page 7
gas only. The hose and hose couplings comply with CGA Standard CAN 1.83. modifications should be attempted. 4. Protect the hose from dripping grease and do not allow the hose to touch any hot surface, including the base of the grill. 5.
LEAK TEST 1. DO NOT USE OR PERMIT SOURCES OF IGNITION IN THE AREA WHILE DOING THE LEAK TEST. INCLUDES SMOKING. 2. Leak testing should be done once per year or whenever the LP gas cylinder or any other gas system part is replaced, whichever is more frequent.
This will allow the orifices to disengage from the burner venturi. 6. Unscrew each gas valve and re-install new natural gas valves and orifices. Use teflon tape or pipe dope when installing valves and orifices. Remove the 3/8” flare fitting that attaches the propane hose from the fitting block inside of the pedestal and replace with an approved 10’...
Page 10
charred remains with a wire brush or scraper. When used for the first time, the grill will emit a slight odor. This is a normal and temporary condition caused by the burn-in of internal paints and lubricants used in the manufacturing process and should not occur again.
LIGHTING INSTRUCTIONS ┌ URNER IGHTING Turn any main burner control to high position. Depress Igniter button and hold or light with a match. If ignition is not immediate, turn burner control off. Wait 5 minutes. └ Ensuring all burner controls are in the off position, slowly turn on the gas supply valve.
Loose electrode wire. Improper gap at electrode tip. Normal occurrence on hot days. OLUTION Ensure lighting procedure followed carefully. All gas grill valves must position when the tank valve is turned on. Turn tank on for all pressure equalize. lighting instructions.
Need help?
Do you have a question about the JG3 and is the answer not in the manual?
Questions and answers