Bleeding The Brakes - Xantia - CITROEN XANTIA User Manual

XANTIA
- Bleed the brakes with the suspension in the high position, after having
operated the suspension as follows..
Position : LOW HIGH
- Jack up the vehicle with the road wheels hanging free.
- Remove the wheels.
XANTIA fitted with ABS.
- The circuit bleeding operation can be made easier by activating the
hydraulic valve block using the LEXIA or PROXIA diagnostic stations or
the ELIT test unit.
BLEEDING THE BRAKES
LOW HIGH.
- Bleed the brakes in the following order : - Rear right.
- Engine running.
- Connect the bleed screw to a receptacle using a transparent pipe.
- Press the brake pedal lightly, or load the pedal with a weight of
5 to 6 kg.
- Slacken the bleed screw, let the fluid escape until it is free of air
bubbles.
- Retighten the screw.
- Top up the LHM reservoir
242
- Rear left.
- Front right.
- Front left.